Re: 90Q Defroster Switch

[Josh Pinkert <flush@us.net>]

At 02:59 AM 4/16/98 -0400, IMSA90QGTO wrote:
>     
>I removed the rear defroster switch from my dash today, as well as the 
>radio and some other stuff just for fun.  upon examination of the switch, 
>the nuber 5 pin has appearently shorted or something.  The plastic around 
>the 5 pin has melted away.  I am going to try and clean it then put it 

This happened to my '88 90Q a long time ago.  The wiring harness for the
switch had melted as well.  Both the switch and the harness had to be
replaced.  PITA, too, because there's not much room to solder a new harness
on.  I don't remember what the parts cost was...


--        
Josh Pinkert 
flush@us.net 
'98 A4q 2.8 
'72 911T 
--