Ur-q Fuse box help (putting a in-line fuse for fuel pump)

[Sonar465 <Sonar465@aol.com>]

last night I opened up the fuse box to have a look at removing the the fuel
pump fuse socket.  It seems that the fuel pump fuse socket is internal in the
fuse block.  I guess I have to take the block apart to get at the wiring.
When I do this should I also take the relay out of the box?  All the wiring
seems to be ok showing no signs of melted insulation so I think my prob. is
just with the fuse holder.  Did all of you  people with experience with this
prob. find the same thing.  I guess as the spring loaded fuse holder gets old
and maybe a bit corroded the resistance goes up and startes to melt the fuse
and holder.  I have to tell the truth that electrics and me do not get along.
I was amazed by the number of wires under the fuse block but I guess if I am
carefull to mark every thing it should not be all that hard to get everything
back to its proper place.  Any BTDT wopuld begreatly appreciated.

Cheers,
Jim