ur-quattro clutch slave cylinder

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <3432251123041998/A97404/CSAV05/11C4BAD91F00*@MHS> Dave Eaton writes:

> also, does normal bleeding practice apply here?

The only thing I've found critical in bleeding is making sure that the
piston in the master cylinder _completely_ sweeps the bore.  This is
because the master cylinder is mounted at around a 30 degree angle
and air bubbles within the cylinder do not naturally return up the
feed pipe.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)