ur-quattro clutch slave cylinder

[frankbauer@thevine.net]

>> also, does normal bleeding practice apply here?
>The only thing I've found critical in bleeding is making sure that the
>piston in the master cylinder _completely_ sweeps the bore.  This is
>because the master cylinder is mounted at around a 30 degree angle
>and air bubbles within the cylinder do not naturally return up the
>feed pipe.

the most successful clutch slave bleed i've done involved setting up a
gravity feed reservoir to supply the s.c. bleeder screw.  anything i've
tried using suction or pressure was an exercise in frustration...

frank

to: IN:quk@isham-research.demon.co.uk
cc: IN:quattro@coimbra.ans.net