Re: 200q20v WGFV measurement(need spec for resistance)

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <v04003a02b17aa0508a4e@[10.1.1.5]> Brett Dikeman writes:

> >> valve?  Mine reads 326 Ohms.  If memory serves, it should be 30-50?

> >Why not just run the diagnostics and see if it's working?

> Cause I don't have a bently to tell me how :)

Get Scott Mockry's instructions on dumping the codes from his web site
at http://www.teleport.com/~scottmo/ecuf.html - but insert the light
and jumper _BEFORE_ switching on the ignition.

Keep making and breaking the contact to step the diagnostics.  When
the LED flashes 4442, it's trying to control the wastegate frequency
valve - about the eighth test.  Hold the valve between your fingers
to feel if anything's happening.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)