RE:Distributor repair 101

[cobram@Channel1.Com (Cobram)]

 -=> Quoting Four Rings <=-

 FR> Call yourself a dumb schmuck. Go back and finish that Mackeson Triple
 FR> Stout. Wonder if you ever learn to think first then do and not the
 FR> other way around.

 FR> Thanks for listening. I feel better now.

     I just went through the same thing less than 10 minutes
     ago, but with the climate control system.  Readout
     dead, check fuses with test light, then proceed to
     spend next hour checking connections (only juice
     getting to memory connector).  Everything is
     OK, (well not OK, but can't be checked without
     voltage).  So, I convince myself that it MUST
     be the fuse box (I had this out earlier in the
     year, and it was corroded underneath, and I already
     bought one from a lister). So I start to pull the fuses
     out..........and the 30 amp fuse that feeds the
     climate control is cooked, the plastic melted. The
     fuse would actually make contact and test OK because
     of the pressure applied by...the test light, no test
     light, no current getting through.  From now
     on, I too will "think first".

     BCNU

... A feature is a bug with seniority.
___ Blue Wave/386 v2.30