Is this a Failing Clutch Slave Cylinder

["Douglas Hurst Quebbeman" <dougq@iglou.com>]

I've seen the subject of failed clutch clave cylinders discussed quite a bit on 
the list. The primary symptom seems to be that the clutch doesn't return all 
the way on its own, and you have to pull it up with your toe.

Well, mine's doing that, but _only_ if I part on an incline (even a slight one) 
with the nose of the car pointing uphill. OTOH, when I park with the nose 
pointing downhill, no roblm at all. And it takes several hours of sitting 
before it starts to do this.

Might I be lucky and only have an air bubble in the hydraulic system that is 
lodging in the wrong place? Or should I replace that slave cylinder _toot 
suite_?

All BTDTs, YMMVs, yada yadas appreciated....  -doug q

--
-Douglas Hurst Quebbeman (dougq@iglou.com)            [Call me "Doug"]
    QuattroClub USA# 4536              Audi International # 100024
       74 100LS Auto, 77 100LS Auto, 84 Coupe GT, 86 5Kcstq   
"The large print giveth, and the small print taketh away."  -Tom Waits