RE: do i have to get a bigger rollbar if i get the 2Bennett setup?

[quattro <quattro@acacianet.com>]

Hi Jack!

'Not exactly' on the duct tape. I used ~4-5 wraps of duct tape on the F or R? struts to eliminate any play because the threaded tubes are just slightly larger ID Vs the OD of the struts. F or R I don't remember, but it's all detailed in the 2B instructions. Just NBD (No Big Deal). Changing struts or adjusting them, no, not 'easy', 'cause the strut still must come out, but a _lot_ 'easier'!

Cheers,

-glen

<snip>
Finally, I've seen the 2Bennet setup on Glen's car, and there is no
duct-tape involved.  Changing ride height is very easy.  It's also
really nice that he can change his shocks without resorting to a spring
compressor, so it becomes an easy job.

Jack Rich