Re: radiator shroud (was 85-87 4000q/coupe)

[ScottyCBoy@aol.com]

In a message dated 98-06-05 15:30:19 EDT, you write:

<< > I will probably have some made at a sheet metal
 > shop but getting paint to stick to galvanized metal may be a
 > challenge.
 
 Why not use aluminum?
 
 -- 
 Huw >>

I just ordered some black ABS plastic from a local plastic dealer, the price
was 25 dollars for a 4 foot by eight foot sheet.  Shipping is going to be
about ten bucks...  This stuff is awesome, it glues nicely, won't rust will
weld easily provided that a plastic welding gun is used, holds up to heat ~250
degrees, and is easily formed with a heat gun.  It can be had in thicknesses
from 1/16th of an inch to 1/2 inches..

Scott