RE: windshield warning light.

["Avi Meron" <avi@cosmoslink.net>]

You can disassemble your sensor in the bottom of the reservoir and clean the
float magnetic contact, some residue from the blue windshield fluid is
obstructing the magnetic field for the float. Clean it up well and you might
be able to save your float sensor, if it is too contaminated or corroded you
might have to get a new float ass'y, about $30,
Avi

> -----Original Message-----
> From: owner-quattro@coimbra.ans.net
> [mailto:owner-quattro@coimbra.ans.net]On Behalf Of R. Shayne Pavlic'
> Sent: Monday, June 08, 1998 1:07 PM
> To: Winslow Douglas; 'quattro@coimbra.ans.net'
> Subject: Re: windshield warning light.
>
>
> I had the same problem on my 91 200TQ5S.  I had to replace the sensor.
>
> Shayne.
> ----------
> >From: Winslow Douglas <WDouglas@fmarathon.com>
> >To: "'quattro@coimbra.ans.net'" <quattro@coimbra.ans.net>
> >Subject: windshield warning light.
> >Date: Mon, Jun 08, 1998, 19:10
> >
>
> >Guys, I need some help. my warning light on my 88 90q for the windshield
> >washer level is constantly on it's very annoying. I tried cleaning up
> >the contacts for the pump and the reservoir but nothing works, anybody
> >have any ideas?
> >
> >winslow douglas
> >Toronto Ont.
> >88 90q
> >
>