Re: S4 flywheel

[bbell04@ibm.net]

No it won't. The '91 200 and the S4 flywheels are quite different.  The S4
has different splines for the input shaft and the bearing is located in the
flywheel rather than the crank.


-----Original Message-----
From: Frank Amoroso <famoroso@sprintmail.com>
To: Malcolm White <M.White@sni.co.uk>; quattro@coimbra.ans.net
<quattro@coimbra.ans.net>
Date: Thursday, June 11, 1998 11:26 PM
Subject: Re: S4 flywheel


>The S4 uses a dual mass setup. If you would like to get rid of it and all
of
>the rotating mass it carries, I believe a conventional flywheel from a '91
>200 tq would do the trick.
>
>Frank--
>-----Original Message-----
>From: Malcolm White <M.White@sni.co.uk>
>To: 'quattro@coimbra.ans.net' <quattro@coimbra.ans.net>
>Date: Thursday, June 11, 1998 2:25 AM
>Subject: S4 flywheel
>
>
>>Could anyone tell me whether the S4/S6 shares the same flywheel as any
>>other model? (European model numbers, please!)
>>
>>Malcolm.
>>
>
>