Re: fault code readings

[Orin Eman <orin@wolfenet.com>]

> I was getting a readout of four long blinks with a long pause in between each
> blink.  Then I cleared out the memory by removing fuse #21 and retested.  Now,
> I'm getting a long blink, then a long pause, then 4 quick blinks in a row,
> long pause, 4 quick blinks...

> I think that means #1111, which is a bad ECU.  Figures it would have to show
> something expensive!

Doubt it.  If those 'quick' blinks are 1 per second, then you are seeing
a single 4, not 1111.  There is 2.5 seconds between each digit, a blink
on time is 0.5 second and there is 0.5 second between each blink.

1111 would be 0.5s blink, 2.5s off four times.  4 blinks in ~12s.
A single 4 would be 4 blinks in ~4s.

Don't expect these times to be too accurate - maybe +/- 15%.

Orin.