'86 5KS Control Arm

["Golda, David" <DGolda@metropo.mccneb.edu>]

		I've finally gotten my strut taken care of.  Thank you
all for your advice.  In the process of replacing the strut I found that
my control arm bearing was shot.  Followed Bently as close as possible
got everything changed out and now the fun starts.  Tried to re-install
all pieces and parts in reverse order of disassembly.  Put control arm
back in place,  tried to put bushings on sway bar and install in control
arm but nothing is lining up. Very difficult to get that connected and
then inserting the ball joint from the control arm in place.  I played
with it and was able to install the ball joint and connect the sway bar
to the control arm but now can't get the control arm bolted to sub
frame.  Any ideas.

						Thanks
							Dave