'86 5KS Control Arm

["Golda, David" <DGolda@metropo.mccneb.edu>]

		While working on my front end I found that I had to
replace the bushing in my control arm.  Disassembly of the front end
wasn't too bad; however,  now that I'm trying to put it back together
I'm having problems.  If I reverse the disassembly process step by step,
I can't get the sway bar in the proper position to get the bushings,
washers and nut connected to the control arm.  Eventually I was able to
install the ball joint and get the control arm and sway bar connected
but now I can't get the control arm bolted in it's proper position in
the subframe.

		Help Me!

						Dave