RE: Upgrading Ur-Q's cooling systems

[Eaton Dave <dave.eaton@minedu.govt.nz>]

my 20v is better cooled than my old wr.  although probably not a lot in
it, especially as my wr had a/c, ad the 20v doesn't.  i've been
interested in the "removal of the aux rad" fix to high running temps...

that is certainly one of the major changes that you notice on the rs2.
it's cooling, (water and oil) is very very good.  for instance, its not
at all unusual to see oil temps > 130 (inaccuracy accepted) on the ur-q,
while i've never seen those temps on the rs2.  the rs2 uses the same
basic setup as the 20v, but i haven't specifically looked for
differences.

dave
'95 rs2
'90 ur-q

> ------------------------------
> 
> Date: Thu, 06 Aug 1998 11:54:24 GMT
> From: quk@isham-research.demon.co.uk (Phil Payne)
> 
> > Is the 20V Ur-Q better cooled? Can I use this radiator and fan for
the 83
> > Ur-Q?
> 
> The 20V seems to use the same auxiliary but has a different part
number
> for the main radiator, which I believe is mounted slightly further
> back.  I don't think there's much difference.
>