RE: Motor Mounts - Looking for the "Biggun's"

["Buchholz, Steven" <Steven.Buchholz@kla-tencor.com>]

I just got the V8 service traning book from Scott Mockry and checked it out.
They state that the motor mounts are the same style as was used for the 200
... I don't know if this means that they are actually the same part or
beefier, but can check this on the fiche at home ...

It does state that the tranny mounts for the V8Q are hydraulic as well, and
this was stated as a change from the 200 ...

HTH!
Steve Buchholz
San Jose, CA (USA)

> ----------
> OK Folks I am acutally building the motor mounts now for the LT-1 swap
> (moving allong nicely now) and I wanted to know if anyone over there knows
> if the V-8 mounts are of a similar design but beefier than the 5000Turbo
> mounts.  I can adapt this shape quite well to my needs but I think the
> LT-1
> will rip it in half.  So I am fishing for ideas.  If you can think of a
> better mount please tell me!
>