what is your favorite Audi interior adhesive?

[Christopher Ritchie <critchie@msh.org>]

Bill Lamb wrote:

>I am a little anxious of using spray type adhesives
> such as 3M because of overspray but I need a permanent solution. 

I have used the 3M adhesive.  Very sticky, seems permanent.  I would
assume that 3M or someone else would make the same adhesive in some
other form.  If it can be sprayed, it should be able to come in a can
or tube.  I think it is popular because it comes in a spray can.  It
is used for those applications where neatness is not necessary and
coverage of large areas is (such as dash coverings, vinyl roofs,
etc.).

Caveats:  

1.  The spray will lift lacquer.  Also the spray is difficult to
control.  Mask well.
2.  Pieces bond immediately, so make sure they are aligned right when
you touch them together.  There will be no ability to slide them
around once the two surfaces come into contact.  There are ways to do
this with wax paper; start at an edge; etc..