Seat heater elements

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <v04003a03b20503ced8a4@[10.1.1.5]> Brett Dikeman writes:

> According to the 200 Bently, which has a _very_ thorough dissertation on
> this, the old pad should NOT(and cannot) be removed.  Rather, one slips the
> new pad under or over, depending upon your orientation, the old one.  The
> pads are not repairable at all, and given that they're heating elements, I
> personally wouldn't try.

It says the same in the ur-quattro microfiche - the seat is repaired
by slitting the leather and sliding a replacement element in from the
side.  No thinks - I'm not cutting anything.  I've already had the
driver's seat to bits, and once I'd mastered 'hawg rings' I had no
trouble putting it back together.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)