Re: Window regulator?/Car cover needed

["reshemo" <robert.shemo@tfn.com>]

If I answer your question, will you send it to me instead since I'm in the
middle of rebuilding said regulator for the 2nd time.

There are two ways to go about it.
(1) If your hands are small enough, there is a lock ring that holds the
window on
which you need to pop off.

(2) Otherwise you have to take the door apart. The black interior portion of
the
door that the regulator is mounted to (including the window frame) can be
unbolted
from the exterior body of the door. There should be 4 bolts around the
corners to
remove. You then have to lift the interior piece up and out (window and
regulator
included). DON'T FORGET TO DISCONNECT ALL WIRES/HOSES FROM
THE INTERIOR PANEL.(I speak from experience :-) ) You can then look the
lock ring square in the face and pop it off to remove the window.

Bob

Jagernauth_Stephen@bns.att.com wrote:

> Hi:
>
> I'm trying to remove the driver's front window regulator from
> my '87 5kt 'parts' car.  I have all the mounting nuts/screws removed,
> total of 7 so far but I can't figure out how the regulator 'arm'
> detaches
> from the window glass.
>
> Any pointers out there would be greatly appreciated.  A fellow
> lister is waiting for me to ship this so please respond directly
> if possible to me since I can't keep up with the list volume.
>
> p.s. anyone with a good full-size car cover for sale, please contact me.
> It's for indoor use only.
>
> Thanks in advance,
>
> Steve Jagernauth   jagernauth_stephen@bns.att.com
> (908) 658-8289 voice    (908) 658-8286 fax
>