RE: EPROM part for MAC-02?

["Buchholz, Steven" <Steven.Buchholz@kla-tencor.com>]

Well, the QTC uses a 2516, which is ever so slightly different from the more
common 2716.  From my investigations the 2516 was made only by Texas
Instruments.  What you can do is to install a machined pin socket in place
of the current EPROM and then you can build a 2716=>2516 adapter by using a
couple more machined pin sockets.  If you want more info on the differences
in the pinouts let me know ...

Steve Buchholz
San Jose, CA (USA)

> ----------
> What EPROM manufacturer and model will work as a replacement for the
> factory PROM in the MAC-02 ECU?
> 
> As it turns out, we have an EPROM programmer at work, so I am going to
> see if it can handle the EPROM for the MAC-02.  If so, then it looks
> like I'll attempt to socket my MAC-02 and customize myself a chip
> based on RDH's annotations.
>