[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Rotor Thickness for 93 100CS

Someone with a 100 may want to confirm this, but I think the wear limit
for the rear disks is 8mm (~.315").
-- 
Elliott

"Si hoc signum legere potes, operis boni in rebus Latinus alacribus et
fructuosis potiri potes!"


Charles Krafft wrote:
> 
> I'm looking for the spec for minimum rotor thickness for my 93 100CS
> quattro avant.  (rear disks, front ones were recently replaced)
> Also, recommendations on pads and source for both.
> Thanks,
> Charles Krafft