[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Reversing light oddity
I noticed the other day that my reversing lights weren't working.
I checked at the switch, and the leads were pulled off. Not me, and
no one else has been in there since the 'repairs' in February. I
checked the fuse was the correct size, and re-attached the leads.
Still no lights. Check the lights, checked the switch, found no
volts on the leads. Got the books out and started tracing the wires.
About two feet along the harness, there's a two-pin grey connector.
This, too, was disconnected. Connected it, and got the lights back.
What I don't understand is: who disconnected it (twice) and why?
--
Phil Payne
Phone: 0385 302803 Fax: 01536 723021
(The contents of this post will _NOT_ appear in the UK Newsletter.)