Re: dump valve install (URGENT)

["Graydon D. Stuckey" <graydon@apollo.kettering.edu>]

On Mon, 21 Sep 1998, Dave Aukerman wrote:

> Installing dump valve kit on 89 200tqw.  Diagram shows a vac/press. line
> going to the top of the dump valve.  I this simply a tee off the vac line
> from turbo?  Sorry for the urgency, but I need to get the car back on the
> road tonight.

Dave;

	That should work.  Remember that if you do not connect the 
vacuum  line, it is no different than a car with no dump valve.  You're 
not stranded.

	I drilled a hole just behind the throttle body and tapped it 1/8" 
NPT so that I could hook up my dump valve control line there.   I figure 
that location should produce the strongest vacuum in the plenum.

Later,
Graydon D. Stuckey

"There's alot more to Jazz than just wrong notes"