Re: 4000S A/C wiring

[JeffG01@aol.com]

In a message dated 9/27/98 4:38:20 PM Eastern Daylight Time,
adamnelson@juno.com writes:

<< I managed to find three likely candidates: 20 ga. BK/BL (dead, not
 ground), 16 ga. BL/BK (Hot) from the blower switch, and 20 ga. BR/Red dot
 (grounded). The Haynes manual doesn't cover this A/C and my
 experimentation has only yielded a blown 30A fuse. If any one knows what
 wires are supposed to be hooked up to the switch, please let me know.
  >>

looked at my compressor socket & found 3 sets of wires. One pair of blue wires
to the leftmost position a red wire in the middle & a pair of brown wires to
the right position. Hope this helps.

BTW played around with window switch and jumper wires to continually test
window motor which certainly made sounds when current applied. To my surprise
& absolute joy, when I pressed the window switch for the 10,000 th time the
window moved down and now works great except for a squealing which I expect is
lack of lube from being stationary for probably about five years.

Thanks to you and all others for your great insight.

Jeff