Re: Easiest way to Chang upper strut bearings

[Ken Keith <auditude@impulsedata.net>]

> Michael Williams <daserde@ucla.edu>
> 
> Joe Rae decided to speak these words:
> 
> >Any body know an easy way to change the upper strut bearngs for a 4000csq?
> >Other then taking the suspention all the way off? can you just undo the top
> >nuts with the car on the ground, and then jack the car up?
> >Any info and BTDT would be much appriciated!
> 
> Unless you have the coilover setup in there, or some springs that dont 
> require a spring compressor, i cant see how you would do it....

I was able to do just that, with my ABT springs,
in my CGT.  I changed 
the front struts without taking the springs out.

Ken
-- 
http://www.geocities.com/motorcity/garage/4153/