Re: '93 90CS Infrared Keyless Entry

["Elliott Potter" <epotter@abraxis.com>]

There are two re-programming procedures--the short one and the long one. 
It sounds like you've tried the long way, have you tried the short way yet?
 Just point the key at the car and click once; if it doesn't work then use
the key to lock (or unlock?  I can't remember...just try both) the driver's
door.  This synchronizes the codes between the key and the alarm.  Also
keep in mind that the alarm can only store 4 key's worth of codes--if
you've been re-programming the same slot then try a different one instead.
HTH!
--
Elliott

----------
> From: Jason A Whyte <Jason.Whyte@dreco.com>
> To: 'Quattro List' <quattro@coimbra.ans.net>
> Subject: '93 90CS Infrared Keyless Entry
> Date: Wednesday, November 04, 1998 11:58 AM
> 
> Back with another question.  The keyless entry system on my 90 worked
> fine for a while and then quit.  I've checked the transmitter and the
> batteries and it's function appear to be fine.  I've also followed the
> re-programming procedure in my owner's manual which hasn't worked.  The
> system does, however, respond to the re-programming steps when I press
> the button because I do hear the "bip" sound from the trunk indicating
> that the programming steps are working.  But after repeating the
> re-programming procedure a few times, it still doesn't lock or unlock
> the doors.  Any advise out there?
> 
> Jason
> '93 90CS
> '91 90Q 20V
> '87 CGT
> '83 CGT