[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 4000 quattro-replacing belts and hoses

To: Martin Pajak <quattro@rogerswave.ca>
Subject: Re: 4000 quattro-replacing belts and hoses
From: Bob <mx@snet.net>
Date: Mon, 09 Nov 1998 09:52:56 -0500
CC: Phil Payne <quk@isham-research.demon.co.uk>, ecschott@earthlink.net, quattro@coimbra.ans.net
References: <91989@isham-research.demon.co.uk> <3646FC3A.947D6E60@snet.net> <3646FB26.5C6DC0BD@rogerswave.ca>
Sender: owner-quattro@coimbra.ans.net

Martin Pajak wrote:

> What are you using to cover the bottom part of the timing belt once you cut the original
> (I hope you are talking about the same thing) cover piece extending from the oil pump
> casting?
> TIA

No, not that one. The flat piece that has to come off once the pulley is off. You have to
take it off to get the water pump off.  Nothing changes as far as protection goes, you just
make that back plate two pieces instead of one.

Bob

References:
- Re: 4000 quattro-replacing belts and hoses
  - From: quk@isham-research.demon.co.uk (Phil Payne)
- Re: 4000 quattro-replacing belts and hoses
  - From: Bob <mx@snet.net>
- Re: 4000 quattro-replacing belts and hoses
  - From: Martin Pajak <quattro@rogerswave.ca>

Prev by Author: Re: 4000 quattro-replacing belts and hoses
Next by Author: 20V Coupe Sighting, on the list?
Prev by thread: Re: 4000 quattro-replacing belts and hoses
Next by thread: RPM question for 88 5ksq
Index(es):
- Author
- Thread