Re: Fuel Injector Removal

[Steve Burke <sburke@wvu.edu>]

Steve,
	You don't even need to loosen those fittings with the injectors in the car.  The
injectors are simply pressed into their holes, and should come out fairly easily.  I
gently used a pry bar, prying against the valve cover and the fuel lines.  Don't pry too
hard, or you'll bend something.  Once they're all out, you can play with the fittings if
you want.
			
			Steve Burke
			87 5ktq


> 
> Mr. Bentley makes no mention of disconnecting injector lines prior to
> engine removal, musta been edited out.  When I tried to coax the fuel line
> off the injector with a flare nut wrench, the hard part of the fuel line