Questions about interior LED? #2

["Steven Chan" <ykloveck@hotmail.com>]

Hi, all:
I took out the whole control panel (sunroof switch, interior light 
included), and I got a hard time to move and open the cover of the 
sunroof switch away from the control panel in order to replace the 
bulb/LED inside the switch. Would you please drop me some lines for how 
to open the switch if you know?
Is QFOM mean owner's mannul? I read the owner's mannul but it didn't 
describe any method for opening switch? Thanks for helping me.
Steven - '93 90CS Quattro


Kirby wrote:
2)  You have to get the switch free from the panel to open on your
workbench.  It should pop out of the panel once the panel is open and 
the connector removed.  Use the methods described (I hope) in the QFOM 
to open the switch.  Shim stock helps to get the switch cover free of 
the tangs that hold it.   If you can't find the description, let me know 
and I'll look for it, the swiches are fairly complicated and it takes a 
while to figure them out from scratch

Steven wrote:
>> Hello, Kirby:
I have a '93 90CS Quattro. I think that the interior switches 
illumination is same as '88 90. My car's LEDs of sunroof switch, 
driver's side switches and the rear mirror control switches not funtion 
properlly.
2)And I opened the sunroof control panel but I did't see any clues to 
replace the LED for the sunroof switch?

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com