Re: An excellent tool source (was "PS pump check valves removal problem")

["Frank J. Bauer" <frankbauer@thevine.net>]

At 08:36 PM 11/21/98 -0500, igor kessel wrote:
>I also have their rather unique tool, which I have never seen _anywhere_
>else: a small reversible ratcheting adapter of unbelievable toughness.
>It is a metal cylinder , about 50x50mm, with a male 1/2" square drive x
>1/2" female square drive, which converts my 22" breaker bar into a
>gigantic ratchet. Comes rather handy in, say, undoing that stubborn 27mm
>bolt on the harmonic balancer (OK, I _do_ use a 1.5m cheater pipe to
>break it loose). I just did the timing belt on my 200 in about 40min
>flat.

i have the craftsman version of this tool.
i bought it (slightly) used several years ago.
i have never seen it in the catalog or the stores.
unfortunately it doesn't have the usual catalog number stamped on it.

frank