Re: V8Q troubles - Dumping Codes w/test wiring info

[Mike Larosa <mlarosa@v8q.East.Sun.COM>]

------------- Begin Forwarded Message -------------

Date: Fri, 4 Dec 1998 16:19:28 -0500 (EST)
From: Mike Larosa <mlarosa@v8q>
Subject: Re: V8Q troubles - Dumping Codes w/test wiring info
To: termite@rocketmail.com, nthomas@imps0014.us.dg.com, 
Andrew.Schnellinger.B@bayer.com
Mime-Version: 1.0
Content-MD5: fksN781rvp9B35G5BckoOQ==

Here are some more complete directions.




Test Light:

	My test light to dump codes consists of a clear 12v 	
	clear bulb with 2 6" wires soldered to it with 
	alligator clips on each end.  Works like a champ.

	You'll also need a 6" wire with an alligator clip on
	each side as well to dump codes.
	

To get to connections:

	
	Pull up the passenger side carpet.
	
	unscrew/remove the passenger side front kick panel.
	Here are all your fuses....
	
	See the black plastic panel on the floor, these are
	the relays.
	
	Below that you'll see 4 connectors, these are the test
	light connections.  
	
	
To Connect test connections :


	Take Bulb w/clips and connect to upper connection
	Pins 1 and 4
	
	Take wire with 2 clips and connect one side to 
	lower Pin 1 and lower Pin 2.
	
	Be ready with pad of paper and pencil.
	
	
It'll do one quick flash, hesitate for a second or 2 then
do 4 sessions of flashing.

Count the blinks and write them down, like so:


4 4 1 1


Meaning 4 blinks, pause, 4 blinks, pause, 1 blink, pause, 1 
blink pause.


	
Send me an e-mail with what codes get dumped and I'll look 
them up.	



Mike L.


------------- End Forwarded Message -------------


	
    _/_/_/  _/    _/  _/     _/      Mike LaRosa
   _/      _/    _/  _/_/   _/       TSE Mission Critical
  _/_/_/  _/    _/  _/  _/ _/        2 Omni Way
     _/  _/    _/  _/   _/_/         Chelmsford, MA 01824
_/_/_/   _/_/_/   _/     _/          			 				     		 
E N T E R P R I S E		     Phone:	978/442-1250
  S E R V I C E S		     Fax:       978/442-1418
				     Email:	
mlarosa@east.sun.com