Re: Pilot Bearing Removal Tool (pn.10-202) Needed

[David Marshall <david@volkswagen.org>]

I removed mine with a small punch - it came out in many pieces.

To install the new one I used a hydrolic jack and a block of wood and
gently pushed it in.

At 12:49 07/12/98 EST, Sonar465@aol.com wrote:
>I was wondering if anybody in the Long Island area has Audi tool 10-202.  I
>need to get the pilot bearing out of the crank so I can get the big girl on
>the road before the snow starts to fall (though with 65deg weather it seem
>improbable) I have tried to pack the crank with grease and that just did not
>work.  Any help would be greatly appreciated.
>
>Cheers,
>Jim
>'84 Ur-q
>'87 5KTQ
>
>

-- David Marshall   				     --
-- 78 1.8L VW Rabbit, 80 2.0L VW Caddy, 87 Audi 5KSQ --
-- 85 VW Cabriolet, 88 2.0L VW Syncro 16" Double Cab --
-- Volkswagen Homepage   http://www.volkswagen.org   --
-- Volkswagen/Audi Parts http://parts.volkswagen.org --
-- mailto:david@volkswagen.org - Quesnel, BC, Canada --