Re: Help, grinding on left turn 4kscq

[Wolff <quattro200@earthlink.net>]

The rock sheild/backing plate behind one of your front rotors is bent.
Right side I think. Bend it out a mm or two on the bottom. BTDT last
time I changed front struts on my 4kq. One of the plates got bent while
the housings were off the car.
HTH,
Wolff

Ckpcnp@aol.com wrote:
> 
> I am feeling a grinding that only happens when the weight is to the front
> right.  Turning to the left under any reasonable speeds would lead to the
> grinding, rubbing feel.  I had the bearing and the axle replaced, and only
> after these were changed, did symptoms develop.