Re: Help, grinding on left turn 4kscq

["Christopher P. Locke" <d.locke@snet.net>]

Ckpcnp@aol.com wrote:
> 
> I am feeling a grinding that only happens when the weight is to the front
> right.  Turning to the left under any reasonable speeds would lead to the
> grinding, rubbing feel.  I had the bearing and the axle replaced, and only
> after these were changed, did symptoms develop.  There is also a pop coming
> from the front right when I turn the wheel occasionally.  The ball joint is
> new. It has gotten more frequent of late.  Any ideas? I've heard it could be a
> motor mount?  or transmission related?  HELP ME PLEASE!!!!!
> Thanks,
> Craig Porter

My 864kcstq has the same problem.  I was told motor mount.  I get my
noise when turning left under power.  coasting left is no problem.  The
motor is really shaky, and when you try to shake the rf wheel like to
check for a bad bearing (btw has been replaced with ball joint) you hear
a clunking noise, which i think is either the motor mount banging onto
itself, or my exhaust pipe hitting the lower sub frame.  BTW, anyone
know of a good place to get motor mounts for an 864kcs(t)q?  I was going
to use Blaufergnugen, but i will look into other opinions!  thanks 
Chris Locke 4kcstq