RE: 5ktq 10 Speaker Radio

["Hussey, Dan" <husseyd@rayovac.com>]

This is true.  You need to get a high-to-low pass converter (for the signal)
to install your radio.  You can get it from Crutchfield with detailed
instructions for about $30, and I think some places like Best Buy or Circut
City may be able to get it (talk to an installer).  The sales people likely
won't know what your talking about.

Later,
Dan

> ----------
> From: 	JJK1204@aol.com[SMTP:JJK1204@aol.com]
> Sent: 	Tuesday, December 29, 1998 10:53 AM
> To: 	quattro@coimbra.ans.net
> Subject: 	5ktq 10 Speaker Radio
> 
> Hi all,
> The radio/cassette in my wife's 87 5ktq has quit, the tape drive died. I
> have
> a Blaupunkt Lexington cassette/CD controller from a former vehicle. I have
> been told that the 10 speaker system uses amplified speakers, from looking
> at
> the wiring diagram in the Bentley manual it appears that only the rear
> speakers are amplified. I believe this since the amp is in the trunk. Can
> anyone guide me through the installation of the Blaupunkt? Do I have to
> use
> the isolator that I purchased when I first bought the car? If yes, how is
> it
> wired into the circuit?
> 
> Thanks in advance,
> John Katos
> 87 5ktq
> 97 Dodge RAM
> many Alfas
>