Re: 89 200TQ Oil Guage

[tm2@earthlink.net]

P-O Selander (EUS) wrote:
> 
> Pat wrote:
> > The oil pressure sending unit for the oil pressure quage is right behind
> > the harmonic balancer on the bottom of the oil pump.  It has one wire
> > coming out of a rubber boot at 90 degrees.
> *************************
> Pat,
> Need someone with a Bentley here but I tend to disagree slightly. Think you
> are looking at the sensor for the oil warning LAMP. On mine ('89 non-turbo
> 100) the sender for the oil pressure gauge is on the left side, a grey "can"
> close to the black knock sensor. It has two wires if I can remember
> correctly. About $80 USD from Linda if I can remember THAT correctly.

P-O

You are right, that is not the oil pressure sender for the guage on the
bottom of the oil pump.  It is the oil temp sending unit.

Pat Korach
Kirkland, WA