RE: 1985 4ks Quattro stalling problem

["Dupree, Jim" <dupree@alldata.com>]

Patrick,
Mine had a large vacuum hose/connector that was split. It connects to the
intake manifold and goes to the breather vent on the valve/cam cover and the
air supply hose for the injectors. It sits between the valve/cam cover and
the intake manifold behind the injector lines. The hose is a common failure
part and it is a preformed part. 
Thanks
Jim Dupree
 <mailto:dupree@alldata.com> dupree@alldata.com
Technical Editor II
ALLDATA Corp.
Database Development
(916) 684-5200 Ext. 3346
Fax: (916) 684-5225

	-----Original Message-----
	From:	Patrick Templeton [SMTP:freq019@hotmail.com]
	Sent:	Tuesday, January 19, 1999 4:11 PM
	To:	quattro@coimbra.ans.net
	Subject:	1985 4ks Quattro stalling problem

	I have an 85 4ks quat and i have been having some stalling problems
at 
	low RPM's , more specifically around 1000rpm.  It is a manual but it
is 
	not a driver shifting problem.  I was wondering if anybody would
know 
	what the cause is or better yet a solution would be?  Please reply
to me 
	privately.

	Thanks

	Patrick

	______________________________________________________
	Get Your Private, Free Email at http://www.hotmail.com