[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need S4/S6/A6 owners help



Sorry for the waste of BW, but I need some help with a couple of P/N's that
are exclusive to the S4 (maybe the A6/S6 also, but not 100% sure). I
recently came across a cheap pair of barely used S4 headlights from a fellow
who did the Euro conversion to put on my '92 100 in order to improve the
poor stock lighting. While the lights are a direct swap fit-wise, the
electrical connection plugs are of course different from those on my 100. I
was just going to call Linda @ Carlsen to get the parts without knowing the
P/N's in advance, but lately it seems if you do not have P/N's for her and
she has to find them for you, the wrong parts get sent. I was hoping someone
could help me out with the P/N's for the two plugs that connect to the rear
of the light assembly, and any rubber boots, etc that cover these plugs. The
first plug is a four-pin plug that is for the high and low beams (only three
pins
are used, one each for the high and low beam wires, and the third a ground).
The second plug is a three-pin plug that is for the fog light (only two pins
are used, one for the light and one for a ground). The corresponding part of
these plugs that are on the light assembly are manufactured by AMP, so I
guess the plugs are also. But when I tried to cross reference their AMP
P/N's on their website, they were not even in their current catalog. If
anyone has a fiche with these P/N's on it, or are able to visually get these
P/N's from their own vehicle, it would be much appreciated. TIA.

Craig
'92 100S (77k)