Re: Boge In, Porpoise Out

[Craig <craigs@nac.net>]

I have just bought an 87 5kcstq. In the first week, I replaced front bearings
and cv boots. Car needs a front wheel alignment bad. I just ordered tie rods,
because the old ones wouldn't loosen properly. I was considering changing
struts also. I was wondering if you could recommend some to me and where I
could get them. I am new to the Audi scene and this is my first one. Being this
baby will be my Valentine this year, I plan on going all out. I would
appreciate any help on gathering tips, help, and info. on this car.
Thanks to all.

Craig
87 5kcstq
Northern NJ

Steve Jensen wrote:

> Hi all,
>
> Just changed the front struts out on my 5KCSTQ with Boge Turbo Gas based on
> recommendations from der List.  The old fronts were very very dead, and as
> a result the car would stand on its nose on hard braking.  As a matter of
> fact, upon removal the right front could be pulled to full extension, and
> letting go it would quickly collapse into the cylinder.
>
> New struts and mounting plates went in very quickly, about the half hour
> per side Dave Head mentioned in a previous post.  The car is transformed
> from wallowing on lane changes to pretty doggone flat.  Anyone with 100K on
> the original struts I would highly recommend doing it now, you'd be amazed
> at what you are missing.
>
> And yes, I did cheat and buy the proper tools from Zellenda.  This car is
> better than a therapist, I'm stress free when the job is finished.
>
> Next up: Battle With the Hot Start Demon!
>
> -Steve Jensen
> 87 5KCSTQ, ATE Powerdisks, Boge Turbo Gas in front,
> ...and daughter's doll on floor in back seat