[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Speedo for 89 200 or 200tq

To: "Audi Internet List (E-mail)" <quattro@coimbra.ans.net>
Subject: Speedo for 89 200 or 200tq
From: "P-O Selander (EUS)" <EUSPOS@am1.ericsson.se>
Date: Fri, 12 Feb 1999 17:18:24 -0600
Cc: "'tm2@earthlink.net'" <tm2@earthlink.net>
Sender: owner-quattro@coimbra.ans.net

Pat,

I'd carefully check again and again. My harness on my 89 100 took a leap
into the flywheel back in 1996. Sliced it back together, didn't work. Bought
a new sender from Carlsen, didn't work. Frustrated, took speedo out, cleaned
everything, checked circuit board, no cold solders etc, nothing apparently
damaged. Wasn't until I took the car to a speedo shop, they tested harness
etc and found out that the new sender was bad.
Carlsen replaced under parts warranty. Everything been fine since.

P-O Selander
Bellevue, WA

application/ms-tnef

Prev by Date: heat problem solved in CQ
Next by Date: Re: As Art Carney used to say.......
Prev by thread: Speedo for 89 200 or 200tq
Next by thread: HELP:1990 V8 4-wheel alignment specs needed.
Index(es):
- Date
- Thread