Hall Sensor pick up pin bent (need quick answer)

[Sonar465@aol.com]

The weater is great so I am putting the trannhy back in the 5Ktq today after
way to many months.  I just put the clutch in and noticed that one of the pick
up's for the hall sensor is bent slightly.  Must have bent it taking the
tranny out.  Should I try to strightten it or is it ok to be slightly bent
(Slightly means at the there is about 3/32" at the farthest point from the
flywheel).  Thanks 

Cheers,
Jim Hahn