BTDT on 2pc EM

[QSHIPQ@aol.com]

MSW writes:
>...hey all, i was wondering if someone has a BTDT on installing the 2 piece
EM.

Many times.  And although the two piece manifold will bolt on to a 5kt-q/200t-
q, you will find that installing it on your Urq won't be such a piece of cake
(hey, but the part numbers are the same:).  However, some fitting and grinding
of the manifold will make the 2pc clear on the Ur.  The manifold itself is a
good upgrade, don't forget the bracket (from WG to trans), to make sure you
don't crack the 2pc (they do, btst) as well.  You will need the two manifolds,
2 pipes, 2 accordian pipes with clamps, 1 bracket (WG to trans), newer style
EM studs and nuts, and a 10mm longer trans bolt for the bracket.  You should
also consider getting two longer studs for the WG attachment as well, you
don't get much of a grab using the stock studs.  Linda @ Carlsen has one of
the best prices complete for around 800USD.  

HTH

Scott Justusson
QSHIPQ@aol.com
'87 5ktqwRS2 (2pc EM)
'84 Urq
'87 4Runner

HTH

Scott Justusson
QSHIPQ@aol.com