RE: Pressure transducers

[Sachelle Babbar <sbabbar@iris.nyit.edu>]

Should be in Scott Mockry's site. Can't really remember. You have to
manually apply pressure or vacuum and read the voltage.

I have a link through my site:
http://iris.nyit.edu/~sbabbar

****************************************************************************
*Steve                                             Sachelle Babbar
*'87  5000CS Turbo 5spd 1.3-2.0 bar             <SBABBAR@IRIS.NYIT.EDU>
*Cockpit adjustable wastegate, AudiSport badge
*
*Disclaimer:"Any information contained herein is based purely on my own
*personal experience and may not necessarily reflect yours. Use caution as
*your results may vary from mine."
********************************************************************************
                                                                               



On Thu, 4 Mar 1999, Lewis, Gary M wrote:

> I'm interested as well...
> Thanks,
> Gary
> 
> > 	I've got a modified ECU that does not perform as I think it should.
> > In
> > thinking through the situation I've come to believe that the pressure
> > transducer in this one could be dead. Is there a test procedure that can
> > be
> > done to determine if that is correct? I didn't see one in the Bentley (but
> > considering the "organization" of the book, it's possible I missed it.)
> > 
> > 	Thanks.
> > 	--ml
> > 
>