[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Pressure Sensor Test-ECU
Phil,
The MAC-05B is used in the KG engine with 8.8 to 1 compression ratio.
It was used around the 1987 era.
I think that this engine is about 184 hp if I recall.
It is tricky to modify due to the high compression.
In New Zealand I was able to get one to run well with 15 PSI of boost.
Then the gasoline octane was lowered and the owner installed an octane
modifier.
Ned
-----Original Message-----
From: Phil Payne [mailto:quk@isham-research.demon.co.uk]
Sent: Friday, March 05, 1999 10:40 AM
To: TheShadow@ConnectCorp.Net
Cc: quattro@coimbra.ans.net
Subject: RE: Pressure Sensor Test-ECU
In message <NBBBKPAGMDMGMKIIMAPCMEIGCPAA.TheShadow@ConnectCorp.Net> "The
Shadow" writes:
> I think you can add Mac-05 to the list too.
What's a MAC05B, genealogically speaking?
--
Phil Payne
Phone: 0385 302803 Fax: 01536 723021
(The contents of this post will _NOT_ appear in the UK Newsletter.)