more on windows, need btdt

[c a l i b a n <caliban@sharon.net>]

	i did more work on the windows, here's what i found.

	in looking at the passenger window, i found that the
	glass itself fit deeper into the window carrier (that's
	what i am calling the part that travels up and down the
	track, connected to the cable) on the passenger side 
	than the driver's side.  the driver's side is the one
	that is malfunctioning, btw.

	i ap pretty sure that the carrier is still ok.  i just
	don't know the correct method of getting the bottom of 
	the window glass properly seated into the carrier.  one
	certaily cannot use a hammer ;)  i tried just pushing it
	as much as i thought it could bear but this was not 
	effective.

	so i'm looking for advice. how do i get the glass to go
	deep enough into the carrier?


--
 rocky mullin
 http://caliban.sf.ca.us/
 two strokes are faster than four!
 this message was composed using the vi editor.
 '83 ur-q - yamaha rz350 - suzuki ts250 -  chaotic good