[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ur quattro questions



In message <000101be6d60$0b002740$6241883e@default> "Jim Haseltine" writes:

> Subject - 1988 MB engined Ur quattro.

> Vacuum hose fitted between the warm-up regulator and the inlet manifold.
> Hose is something like 3/16 or 1/4 inch id, inlet manifold take-off is more
> like 3/8 od. On my engine the union between the hose and the inlet manifold
> has been achieved by sleeving the hose into a short piece of larger diameter
> hose (Audi part #049 133 335 A marked on it) and the larger hose is fitted
> to the manifold. The whole setup looks jury-rigged to my eye. How should
> this hose be fitted?

It shouldn't.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)