Re: 1.5 bar cutout on unchipped 5kcstq

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <36FFB036.B4EFE842@remdesign.com> Wallace White writes:

> I don't spend a whole lot of time at WOT, but I haven't had this happen
> before. The ECU and wastegate spring are stock. What would cause this
> overboost condition? Thanks.

A leak in the inlet manifold --> WGFV line, or a dead WGFV.  Run the
output diagnostics from Scott's web page (hold the WGFV between finger
and thumb) and check the hoses.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)