RE: 200Q flywheel in 4kQ or CGT

[Phil & Judy Rose <pjrose@servtech.com>]

The flywheel pins on the tranny side are evidently (according to Bentley)
for clutch "centering".

Phil

>Date: Tue, 30 Mar 1999 10:32:46 -0800
>From: "Buchholz, Steven" <Steven.Buchholz@kla-tencor.com>
>Subject: RE: 200Q flywheel in 4kQ or CGT
>
>AFAIK these pins are for the sensor that gets plugged into the bellhousing
>for diagnosis (VAG 1551?).  I'd recommend that you leave them there unless
>they interfere with something ... they should not affect normal operation of
>the engine ...
>
>HTH!
>Steve Buchholz
>San Jose, CA (USA)
>
>	----------
>	From:  Bruce Bell [SMTP:bbell04@ibm.net]
>	Sent:  Tuesday, March 30, 1999 7:30 AM
>	To:  mxbreed@lancnews.infi.net; quattro@coimbra.ans.net
>	Subject:  RE: 200Q flywheel in 4kQ or CGT
>
>	Yes, what are these pins for?  The pin Orin mentioned is for the
>crank
>	position sender and the rpm sender uses the teeth....
>
>	Bruce

Phil Rose

'91 200q	Rochester, NY
'89 100		716-244-4274
		pjrose@servtech.com