[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: removing a 5k windshield...help!
"Lewis, Gary M" <Gary.Lewis@West.Boeing.com> writes:
>This isn't a contradiction, but a question. My 88 5kcstq is leaking
>water onto the floor of the car. I noticed a rubber seal bulging out
>between the windshield and the chrome strip, on the same side
There may be a some rubber molding, but it doesn't hold in the windshield
like the old VW, Mercedes Benz etc. windshields were held in, as the
original poster was alluding to. The 5K windshield is held in and sealed
with an adhesive. I'm going from memory here, I will check the Bentley
(don't have it where I'm at now) but I think they go into good detail on
the winshield section.
Is the water leaking on the passenger side footwell area? If it is, it
may not be the windshield.
BCNU,
Cobram@Juno.Com
http://www.geocities.com/MotorCity/Flats/1469/
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]