Need Retrofit Info For UrQ Cap and Rotor

[ANDREW FINNEY <afinney@bigplanet.com>]

I need some help here. I retro-fitted the newer style distributor cap,
coil and wires from a 5000 tq on my 1983 UrQ. For anyone who doesn't
know this, I've been told this dramatically reduces ignition misfires
with the UrQ. The old style wires push down into a copper lined plug
hole, the new style, found also on the later coupes and 4000s, have a
little stud in the center of the plug hole that the plug wires and coil
wire slip onto. This makes a much better connection and stopped all the
hesitation problems I was having with my UrQ.

What I need is the PN, or application for a rotor that will work better
with this cap. The new style cap off a 5000tq sits higher than the old
one. The old rotor works OK with this, but the rotor from the 5000tq was
the wrong diameter to fit the shaft of the UrQ distributor. Can anyone
give me an app that will have a good rotor for this conversion? Please
respond directly to afinney@ch2m.com, I'll be at work. Thanks.

Andrew Finney
1983 UrQ